The safety of our customers is our top priority. Wearing an approved helmet during test rides is mandatory. You can either bring your own helmet or you can use one of the VoltBike approved helmets available in the showroom.
If you have made an error when placing your order online for an incorrect bike model, helmet or colour selection, accessory, or are having second thoughts on your final order, we can certainly correct it before it ships but we will not be able to adjust any orders that have already shipped.
We offer customizable options for each bike model such as: frame size, battery size, front rack and helmet choice.
We offer a complimentary helmet for each bike but where a helmet is not needed we provide specific options in lieu of the helmet within the same drop down menu.
The complimentary item offered for each bike cannot be exchanged as a monetary value towards the bike
No exceptions to swap out any parts or complimentary accessories with other items at this time.
We are open Mon-Fri 9am-5pm and Saturdays we are open from 10am-3pm for test rides. We are located at #1125 - 1579 Kingsway Ave, Port Coquitlam, BC.
This procedure is required only if you experience noise when stopping the bike.
In this video you will learn how to troubleshoot issues with your brake but inhibitors or error 05E on the LCD screen.
This article covers the process of removing the freewheel on such Yukons.
Before you start, make sure that you have generic grease, 4mm, 5mm and 6mm allen keys.
Before you start, make sure that you have 5mm allen key, 2mm allen key, flat head screwdriver and replacement brake pads.
P01：LCD backlight brightness. Default is 2.
P02：Switch between KM and Miles, 0:KM; 1:MILE；
P03：Voltage rating: 24V, 36V, 48V. Default is 36.
P04：Sleep time. Default is 0.
P05：Pedal assist level range. Default is 5.
P06: Wheel diameter in inches. Default is 20.
P07: Speed magnetic steel number. Default is 6.
P08：The speed limit：Range 0-50km/h，Default 50.
P09：Throttle activation 0：activate from dead stop；1：Activate after gain speed；Default 0.
P11：Power sensitivity setting Range：1-24；Default 1;
P12：Booster starting strength setting Range：0-5；Default 5
P13：Magnetic sensors on the pedal assist plate. Default 12.
P14：Controller amperage setting. Default 12.
P15：Turn speed duty ratio setting Range：0-100. Default 100.
P16: Default 0
P99: Default 99
ODO: Default 5
Three wheeled electric tricycles offer a unique riding experience.
Riders must be aware that the Voltbike Trio steers and handles differently than a bicycle. Lower your speed limit setting, and take extra caution when accelerating, turning , and braking. Failure to do so may cause the Trio to become unstable and result in personal injury.