Is it possible to use a wheel lock nut/bolt system like the Kryptonite or the Abus systems on the Voltbike Bravo. The Krytonite nutz use a M9, M10, or 3/8's size nut and the boltz use a 130mm and 150mm size.

88 views  December 12, 2018
The Bravo front hub spacing is quick release 100 mm, so the 130mm QR version seen below may be your best bet. The front axle should be a 9mm if you swapped to a solid axle but cone threads are not always standardized. The rear hub is 142mm and uses a solid 12mm but is not really going to be compatible with what you mentioned. The rear wheel is more work to pull out so less of a target for theft. That said a good lock and common sense are your best deterrent against bike thieves.

   Ask a question

Terms & Conditions

There is no content for Term & Conditions.
I Agree with the Terms